python() and python-fetcher() source options

The python() and python-fetcher() drivers have the following options.

class()

Description: The name of the Python class that implements the source, for example:

   python(
        class("MyPythonSource")
    );

If you want to store the Python code in an external Python file, the class() option must include the name of the Python file containing the class, without the path and the .py extension, for example:

   python(
        class("MyPythonfilename.MyPythonSource")
    );

For details, see Python code in external files

fetch-no-data-delay()

Description: If the fetch method of a python-fetcher() source returns with the LogFetcher.FETCH_NO_DATA constant, the source waits fetch-no-data-delay() seconds before calling the fetch method again. If you want to call the fetch method sooner, set the fetch-no-data-delay() option to the number of seconds to wait before calling the fetch method.

flags()

Description: Specifies the log parsing options of the source.

• assume-utf8: The assume-utf8 flag assumes that the incoming messages are UTF-8 encoded, but does not verify the encoding. If you explicitly want to validate the UTF-8 encoding of the incoming message, use the validate-utf8 flag.

• dont-store-legacy-msghdr: By default, AxoSyslog stores the original incoming header of the log message. This is useful if the original format of a non-syslog-compliant message must be retained (AxoSyslog automatically corrects minor header errors, for example, adds a whitespace before msg in the following message: Jan 22 10:06:11 host program:msg). If you do not want to store the original header of the message, enable the dont-store-legacy-msghdr flag.

• empty-lines: Use the empty-lines flag to keep the empty lines of the messages. By default, AxoSyslog removes empty lines automatically.

• exit-on-eof: If this flag is set on a source, AxoSyslog stops when an EOF (end of file) is received. Available in version 4.9 and later.

• expect-hostname: If the expect-hostname flag is enabled, AxoSyslog will assume that the log message contains a hostname and parse the message accordingly. This is the default behavior for TCP sources. Note that pipe sources use the no-hostname flag by default.

• guess-timezone: Attempt to guess the timezone of the message if this information is not available in the message. Works when the incoming message stream is close to real time, and the timezone information is missing from the timestamp.

• kernel: The kernel flag makes the source default to the LOG_KERN | LOG_NOTICE priority if not specified otherwise.

• no-header: The no-header flag triggers AxoSyslog to parse only the PRI field of incoming messages, and put the rest of the message contents into $MSG.

  Its functionality is similar to that of the no-parse flag, except the no-header flag does not skip the PRI field.

  Note Essentially, the no-header flag signals AxoSyslog that the syslog header is not present (or does not adhere to the conventions / RFCs), so the entire message (except from the PRI field) is put into $MSG.

  Example: using the no-header flag with the syslog-parser() parser

  The following example illustrates using the no-header flag with the syslog-parser() parser:

      parser p_syslog {
        syslog-parser(
          flags(no-header)
        );
      };
  

• no-hostname: Enable the no-hostname flag if the log message does not include the hostname of the sender host. That way AxoSyslog assumes that the first part of the message header is ${PROGRAM} instead of ${HOST}. For example:

      source s_dell {
          network(
              port(2000)
              flags(no-hostname)
          );
      };
  

• no-multi-line: The no-multi-line flag disables line-breaking in the messages: the entire message is converted to a single line. Note that this happens only if the underlying transport method actually supports multi-line messages. Currently the file() and pipe() drivers support multi-line messages.

• no-parse: By default, AxoSyslog parses incoming messages as syslog messages. The no-parse flag completely disables syslog message parsing and processes the complete line as the message part of a syslog message. The AxoSyslog application will generate a new syslog header (timestamp, host, and so on) automatically and put the entire incoming message into the MESSAGE part of the syslog message (available using the ${MESSAGE} macro). This flag is useful for parsing messages not complying to the syslog format.

  If you are using the flags(no-parse) option, then syslog message parsing is completely disabled, and the entire incoming message is treated as the ${MESSAGE} part of a syslog message. In this case, AxoSyslog generates a new syslog header (timestamp, host, and so on) automatically. Note that even though flags(no-parse) disables message parsing, some flags can still be used, for example, the no-multi-line flag.

• sanitize-utf8: When using the sanitize-utf8 flag, AxoSyslog converts non-UTF-8 input to an escaped form, which is valid UTF-8.

  Prior to version 4.6, this flag worked only when parsing RFC3164 messages. Starting with version 4.6, it works also for RFC5424 and raw messages.

• store-legacy-msghdr: By default, AxoSyslog stores the original incoming header of the log message, so this flag is active. To disable it, use the dont-store-legacy-msghdr flag.

• store-raw-message: Save the original message as received from the client in the ${RAWMSG} macro. You can forward this raw message in its original form to another AxoSyslog node using the syslog-ng() destination, or to a SIEM system, ensuring that the SIEM can process it. Available only in 3.16 and later.

• syslog-protocol: The syslog-protocol flag specifies that incoming messages are expected to be formatted according to the new IETF syslog protocol standard (RFC5424), but without the frame header. Note that this flag is not needed for the syslog driver, which handles only messages that have a frame header.

• validate-utf8: The validate-utf8 flag enables encoding-verification for messages.

  Prior to version 4.6, this flag worked only when parsing RFC3164 messages. Starting with version 4.6, it works also for RFC5424 and raw messages.

  For RFC5424-formatted messages, if the BOM character is missing, but the message is otherwise UTF-8 compliant, AxoSyslog automatically adds the BOM character to the message.

  The byte order mark (BOM) is a Unicode character used to signal the byte-order of the message text.

For the python() and python-fetcher() sources you can also set the check-hostname flag, which is equivalent with the check-hostname() global option, but only applies to this source.

The flags and the hostname-related options (for example, use-dns) set in the configuration file influence the behavior of the LogMessage.parse() method of the Python source. They have no effect if you set the message or the hostname directly, without using LogMessage.parse().

keep-hostname()

Description: Enable or disable hostname rewriting.

• If enabled (keep-hostname(yes)), AxoSyslog assumes that the incoming log message was sent by the host specified in the HOST field of the message.

• If disabled (keep-hostname(no)), AxoSyslog rewrites the HOST field of the message, either to the IP address (if the use-dns() parameter is set to no), or to the hostname (if the use-dns() parameter is set to yes and the IP address can be resolved to a hostname) of the host sending the message to AxoSyslog. For details on using name resolution in AxoSyslog, see Using name resolution in syslog-ng.

This option can be specified globally, and per-source as well. The local setting of the source overrides the global option if available.

log-iw-size()

Description: The size of the initial window, this value is used during flow-control. Its value cannot be lower than 100, unless the dynamic-window-size() option is enabled. For details on flow-control, see Managing incoming and outgoing messages with flow-control.

loaders()

Description: The AxoSyslog application imports Python modules specified in this option, before importing the code of the Python class. This option has effect only when the Python class is provided in an external Python file. This option has no effect when the Python class is provided within the AxoSyslog configuration file (in a python{} block). You can use the loaders() option to modify the import mechanism that imports Python class. For example, that way you can use hy in your Python class.

   python(class(usermodule.HyParser) loaders(hy))

options()

Description: This option allows you to pass custom values from the configuration file to the Python code. Enclose both the option names and their values in double-quotes. The Python code will receive these values during initialization as the options dictionary. For example, you can use this to set the IP address of the server from the configuration file, so it is not hard-coded in the Python object.

   python(
        class("MyPythonClass")
        options(
            "host" "127.0.0.1"
            "port" "1883"
            "otheroption" "value")
    );

For example, you can refer to the value of the host field in the Python code as options["host"]. Note that the Python code receives the values as strings, so you might have to cast them to the type required, for example: int(options["port"])

options(
  "host" => "localhost"
  "port" => "1883"
  "otheroption" => "value"
)

persist-name()

Description: If you receive the following error message during AxoSyslog startup, set the persist-name() option of the duplicate drivers:

Error checking the uniqueness of the persist names, please override it with persist-name option. Shutting down.

This error happens if you use identical drivers in multiple sources, for example, if you configure two file sources to read from the same file. In this case, set the persist-name() of the drivers to a custom string, for example, persist-name("example-persist-name1").

   log {
        source { python(class(PyNetworkSource) options("port" "8080") persist-name("<unique-string>); };
        source { python(class(PyNetworkSource) options("port" "8081")); };
    };

   from syslogng import LogSource
      class PyNetworSource(LogSource):
        @staticmethod
        def generate_persist_name(options):
            return options["port"]
        def run(self):
            pass
        def request_exit(self):
            pass

tags()

Description: Label the messages received from the source with custom tags. Tags must be unique, and enclosed between double quotes. When adding multiple tags, separate them with comma, for example, tags("dmz", "router"). This option is available only in version 3.1 and later.

time-reopen()

Description: The time to wait in seconds before a dead connection is reestablished.

time-zone()

Description: The default timezone for messages read from the source. Applies only if no timezone is specified within the message itself.

The timezone can be specified by using the name, for example, time-zone("Europe/Budapest")), or as the timezone offset in +/-HH:MM format, for example, +01:00). On Linux and UNIX platforms, the valid timezone names are listed under the /usr/share/zoneinfo directory.